TSC AUTO ID Technology Co., Ltd. 74 Copyright 2013 All Rights Reserved.
Vertical multiplication, up to 10x
Available factors: 1~10
For true type font, this parameter is used to specify the height (point) of
true type font. 1 point=1/72 inch.
For *.TTF font, x-multiplication and y-multiplication support floating value.
(V6.91 EZ)
Optional. Specify the alignment of text. (V6.73 EZ)
0 : Default (Left)
1 : Left
2 : Center
3 : Right
Note:
ï‚ The internal font (font #1~#5) pitch between TSPL and TSPL2 is different.
ï‚ Font "0" and "ROMAN.TTF" internal True Type Fonts are available in TSPL2 language
printers, but not TSPL language printers.
ï‚ If there is any double quote (") within the text, please change it to \["].
ï‚ If font "0" is used, the font width and font height is stretchable by x-multiplication and
y-multiplication parameter. It is expressed by pt (point). 1 point=1/72inch.
ï‚ EPL2 and ZPL2 are emulating for Eltron
®
and Zebra
®
languages.