TTI TSC-3000R - Memory Management; Memory Bank Structure

The scanner memory storage area has a capacity of 1300
locations. These are split into specific segments as follows:
1000 Manual Storage Memories.
200 Automatic Storage Memories
50 Limited Search Memories (2 x 25 pairs)
50 Dual Watch memories (2 x 25 Pairs)
MEMORY BANKS
Manual Memories
The Manual Memory area allows the user to manually store up to
1000 individual frequencies. It is split into memory banks with a
maximum capacity of 40 memory banks, each containing 25
memory locations (40 x 25 = 1000).
However the memory capacity of each bank is flexible up to a
maximum of 100 memories per bank, but at a reduction in the
number of banks available.
For example, in an extreme case where each bank is programmed
with the maximum 100 memories, the number of banks available
would be reduced to 10 (10 banks x 100 memories = 1000
memory capacity).
The default Manual memory banks are labelled 00 to 39.
Automatic Memories
The Automatic Memory area can store up to 200 frequencies in
two banks of 100 memories. The automatic memory is used when
searching a band of frequencies. The scanner can automatically
store any active frequencies it finds while searching.
The Automatic Memory banks are labelled A0 and A1
31
TSC-3000R
ENGLISH