TTI TSC-3000R - Initial Setup and Accessories; Battery Pack Installation

Removing
1) Ensure the receiver is switched
off.
2) Holding the receiver in one hand,
press down on the battery
release catch.
3) List the top of the battery pack
away from the receiver.
• Scanner Receiver
• Antenna
• Lanyard Strap
• Rechargeable Battery Pack
• Earphone
• Charger Cradle
• Power Adaptor
SUPPLIED ACCESSORIES
FITTING AND REMOVING THE BATTERY PACK
Fitting
1) Ensure the receiver is switched
off.
2) Align the bottom of the battery
pack with the securing slots in
the base of the receiver.
3) Press the top of the battery pack
into the back of the receiver until
it ‘clicks’.
ENGLISH
6
TSC-3000R