TTI TSC-3000R - Priority Scan

Priority Scan allows you to insert a Priority channel or frequency
into the channel Scan. When the Scan is activated, the receiver will
visit the Priority channel or frequency at an interval set by the
'Priority Time' in the Menu setup.
To perform a Priority Scan using a frequency as the Priority
channel:
1) Enter the required Priority
channel frequency using the
Keypad then press E/VFO.
2) Press Func PRI. The selected
frequency is now the Priority
Channel.
3) Press Func MR to select the
Memory Read mode.
4) Press Bank/Band to select the
preferred memory bank you
wish to scan.
5) Press Scan/Src. The receiver
will begin scanning th e selected
Band and will switch to the
Priority channel at an interval
set by the 'Priority Ti me' setting
in the setup m enu.
4
5
2 3
Priority Scan
2
3
1
1
ENGLISH
44
TSC-3000R