TTI TSC-3000R - Dual Watch Memories

To store a pair of Dual Watch frequency into the Dual Watch
Memories
The Dual Watch memories ar e used to store a pair of frequencies
that will be monitored whe n the D ual Watch feature is enabled. Up
to 50 f requencies (25 pairs) can be stored.
1) Press the E/VFO key to select
VFO Mode.
2) Press the Band key to select the
required band.
3) Adjust the Squelch so the receiver
is muted.
4) Enter one of the frequencies that
you wish to monitor.
5) Press Func DW. The ‘D’ Dual
Watch ic on will b e displa yed.
6) Enter a second frequency using
the control knob or the number
keys.
7) Press t he E/VFO key to accept. The Dual Watch function will
begin.
8) Now press Func MW. The receiver
enters the Memory Write mode and
selects the Du (Dual Watch) memory
bank.
9) Use the con trol knob to selec t an empt y channel to store the
frequency pair.
10) Press Fun c MW again to store the two frequencies. They will
be stored Axx and bxx where xx is the empty channel you
selected.
Dual Watch Memories
2
8
6
9
4
1 7
5 8
10
3
5
10
or
4
6
8
ENGLISH
40
TSC-3000R