TTI TSC-3000R - Storing Manual Memories

STORING FREQUENCIES INTO THE MEMORIES
To manually store a frequency into one of the manual memories:
1) Press the E/VFO key to select VFO
Mode.
2) Press the BAND key to select the
required B and.
3) Select the frequency that you want
to store using the number keys or
the contr ol knob.
4) Press Func MW to enter the
Memory Write mode.
5) The receiver will find and display an empty memory bank and
memory location automatically.
6) If required, use the number keys to select a new memory bank
e.g. for memory bank 16 press 1 and 6
7) To change the memory location, rotate the control knob.
8) Press Func MW again to store the frequency.
Manual memories
2
4 5
73
1
4 8
4
5
4 8
33
TSC-3000R
ENGLISH
6
3