TTI TSC-3000R - Page 41

To recall a p air of Dual Watch frequencies from the Dual Watch
Memories
1) Press the E/VFO key to select
VFO Mode.
2) Set the squelch level to a point
where the receiver is just quiet.
3) Press Func MR. The receiver will
enter the Me mory Read mode.
4) Press the BANK key repea tedly to
step through the memory banks
until Du is selected or press SKIP
to directly access Du bank.
5) Select the required channel using
the co ntrol k nob.
6) Briefly press the SCAN/SRC key. Dual Watch will begin with
the receiver monitoring the channels in the selected Dual
Watch memory.
4
6
5
1
3
2
4
3
41
TSC-3000R
ENGLISH
or