Tuttnauer TIVA2 - Electromagnetic Compatibility (EMC)

30
Instructions for use - Tiva2 - Tiva2H Thermodisinfector
Additional indications regarding the electrical connection are
shown in the installation diagram. This can also be down-
loaded from www.tuttnauer.com.
5.2.1 Electromagnetic compatibility (EMC)
The machine has been tested on electromagnetic compatibility
(EMC) pursuant to Standard EN 61326-1 and is suitable for
operation in institutes such as hospitals, medical practices,
laboratories and environments connected to the public elec-
tricity grid.
The high-frequency (HF) energy emissions of the machine are
so small that interferences with electrotechnical equipment in
the immediate vicinity are not likely.
Theoptimalpositioningoormustbemadeofconcrete,wood
orceramictiles.Incaseofmachineoperationonoorsmade
of synthetic materials, the relative humidity must be 30% to
minimise the likelihood of electrostatic discharges.
Fig. 8 - Connections (rear view of the machine)
1) Cold water connection. - 2) Power supply socket. - 3) Drain
connection. - 4) Cold or puried water connection (depending
on the sales conguration).
1
2
3
4