Tuttnauer TIVA2 - Troubleshooting

75
Maintenance
Problem Cause Solution
The machine does not start Tripped fuse/ Activate the fuse
circuit breaker of the electrical /switch of the electrical
system. system.
The machine is off. Press the ON/OFF key
The program does not start Door closed not Check closure
correctly. of the door
The program stops No chemical products. Turn off the machine and
  llthecontainers.
 Waterowclosed. Openthewaterow.
The temperature of The thermostat sensor in the Clean the thermostat
sensor
operation for the wash tank is covered
program is not with deposits.
reached
Themachinedoesnotdry Theairlterinthedrying Replacethelter.Have
system is dirty or extraordinary maintenance
clogged. performed by technical assis-
tance.
Whitedepositsinthe Softenernisheddueto Addthesaltfor
washing tank lack of salt. regeneration.
7.2 Troubleshooting
The following table lists the main malfunctions, with relative
causes and recommended solutions, that the machine could
present during its operation.
The interventions that may become necessary must be carried
outbyexperiencedandqualiedoperators.
If the problems persist or appear even more often after perform-
ing the work reported below, contact the Tuttnauer Europe b.v.
technicalassistanceofanauthorisedandqualiedtechnician.