50
Instructions for use - Tiva2 - Tiva2H Thermodisinfector
6.2.4 Treatment of dental instruments
WARNING. Insert only instruments suitable for automat-
ic treatment in thermodisinfector devices, according to
the manufacturer’s instructions. In particular, follow the
information provided by the same manufacturer.
Despite compliance with the manufacturer’s instruc-
tions, in case of damage or alteration of the instruments,
the responsibility will be borne by the instrument man-
ufacturer.
Correct program
Before starting the treatment, check that:
- The external surface of the instruments is clean of material
residues (E.g. dental cement, etc.).
- The air and spray channels must be clean.
- Finally, carry out a test.
Use Tuttnauer Europe b.v. recommended liquids (see para-
graph «5.5.2 Liquid use and storage»).
Care of the instruments
Major manufacturers recommend drying the spray/air/water
channels immediately after cleaning and disinfection using
clean compressed air with suitable maintenance products.
Itisrecommendedtofollowthespecicinstructions.
To Next Page
Loading...
