53
Using the machine
Program structure:
• Drain
It is used to empty the washing tank.
• Pre-wash
Pre-wash is necessary to eliminate coarse dirt and foamy sub-
stances.
• Wash
Depending on the load, washing normally takes place at 45°C -
65°C, adding the appropriate detergent.
• Rinse
The rinsing operation eliminates and neutralises the chemicals of
previous washes.
• Disinfection
To prevent the load from being subject to corrosion or patinas, pu-
ried water (if available) should be used during the disinfection
phase.
• Drying
Sufcientdryingreducestheriskofcorrosioncausedbytheresid-
ual humidity on the load.
To Next Page
Loading...
