61
Using the machine
8) It displays the temperature measured by the PT1000 probe
placed in the tank. This is a control probe;
9) It is the display of the temperature measured by the PT1000
probe placed in the tank. This is a work probe. The temper-
ature detectable by the two probes (control and work) must
not differ from each other by more than 2°C;
10) Time for which the device should maintain the set temper-
ature (see 12);
11) Phase of the program;
12) Temperature set for the current phase;
13) Date and time is displayed with the machine in stand-by.
To Next Page