Chapter 1 .Introduction
This tractor service manual is for qualified service personnel engaged in servicing
and overhauling 3510/4110/T390(T400)/T430(T450) tractor.Use of this publication
is not recommended for field operators since they usually do not have access to
special tools and shop equipment essential for most servicing.
Servicing procedures outlined herein contain sufficient information to return all
component parts of a tractor to new condition. In discussion of each component
parts,it is assumed that a complete overhaul is been performed,consequently,
complete disassembly and reassembly are outlined.The mechanic is relied upon to
decide how far disassembly must be carried when complete overhaul is not required.
Study unfamiliar service procedures thoroughly and clearly understood before
attempting disassembly. Specific data essential for proper overhaul,such as running
clearances and torque values,have been provided in interline of Inspection and
reassembly procedures of each group section.
This manual was compiled from latest information available at time of publication.
Manufacturer reserves the right to make changes at any time without notice.
Whenever the terms "left"and "right" are used, They means as viewed by the
operator when seated in the operator's seat.
1-1
To Next Page
Loading...
Need help?
General
