EasyManua.ls Logo

UAZ PICKUP - Instrumentation and Warning Alarms; Annex 2. Tightening Torque of Main Threaded Couplings

UAZ PICKUP
208 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
186
Luggage compartment lamp is located on the right side of the
compartment (Fig. 9.45). To replace the lamp, remove the lamp
shade by pushing it through the side hatch under cap 1. Release
holder 3 and replace lamp 2.
Fig. 9.45. Luggage
compartment lamp:
1 — cap; 2 — lamp;
3 — lamp holder; 4 — catches.
Gages and alarms
When removing electric sensors, isolate the wires to avoid short
circuiting. Use a hex socket wrench or a box wrench to remove the
coolant temperature sensor and the coolant emergency temperature
sensor without damaging their housings.
Check the uid level in the cooling system of the radiator. If
the uid level is low, the sensor may fail.

Table of Contents

Related product manuals