151
CHASSIS
Suspension
WARNING! Shock absorber disassembly is strictly forbidden
to avoid accidents.
The motor vehicle operation at malfunctioning or missing shock
absorbers and worn out suspension joints is strictly prohibited.
Front and rear shock absorbers are not interchangeable.
Hydraulic shock absorbers are not served and repaired. Upon
shock absorbers replacement, replace axle assembly.
Replace suspension pin joints in case of knocks, squeaks and/
or rubber bundle. Do not operate the vehicle with track control
arm and/or tie rod deformation. Upon pin joints replacement the
complete nuts tightening (see Annex 2) is to be performed on the
wheeled motor vehicle.
Upon spring installation, the complete tightening (see Annex
2) of ladder nuts, front axle spring nut and spring shackle bolt nuts
is performed at motor vehicle weight load.
Wheels and tires
WARNING! Worn out and damaged tyres, excessive or
insufcient air pressure in them, deformed discs or weakening of
fastening of wheels can cause an accident. Regularly check tyres
condition and air pressure, discs condition and safe mounting.
Since tyres of different models (tread patterns) may have dif-
ferent sizes and stiffness performances, use identical tyres for all
wheel discs.
WARNING! Using tyres and wheels of deprecated dimen-
sions can lead to uneven tire wear, deterioration in motor vehicle
handling, increased fuel consumption and braking distance, the
appearance of vibration on the steering wheel and cause mal-
function of the ABS system (if any), which in turn can lead to a
serious accident.
Use only identical tyres of dimensionality and manufacturer for
all wheels. Otherwise driving system components can be damaged.
To Next Page
Loading...
