Uconnect 430 - Entering Coordinates; About the Map Pages; Viewing the Map While Navigating

2. From the main menu, touch Where To? > Browse
Map.
3. Touch an area on the map.
4. Touch
> Set Location.
Entering Coordinates
If you know the geographic coordinates of your destina-
tion, you can use your navigation system to navigate to
the destination using the latitude and longitude coordi-
nates.
1. From the main menu, touch Where To? > Coordi-
nates.
2. Touch a field to enter the latitude and longitude data.
3. Touch View on Map.
4. Touch Go!.
Changing the Map Coordinate Format
1. From the Home Screen, touch Where To? > Coordi-
nates >
> Format.
2. Select a format.
ABOUT THE MAP PAGES
Viewing The Map While Navigating
NOTICE
In no event shall Garmin be liable for any incidental,
special, indirect, or consequential damages, including,
without limitation, damages for any traffic fines or cita-
tions, whether resulting from the use, misuse, or inability
to use the product or from defects in the product. Some
states do not allow the exclusion of incidental or conse-
quential damages, so the above limitations may not
apply to you.
114 NAVIGATION (Uconnect® 430N Only)