Uconnect 430 - Repeat Track; Bluetooth Streaming Audio (Btsa); Controlling BTSA Using the Radio; Play Mode

Repeat Track
The repeat track function repeats the currently played
track. Touch the Rpt. TRK soft-key to switch the repeat
track function on or off.
A red check mark indicates the repeat track function is
active.
BLUETOOTH® STREAMING AUDIO (BTSA)
Music can be streamed from your cellular phone through
Uconnect® Phone (if equipped) and played through the
vehicles sound system.
Controlling BTSA Using The Radio
To enter BTSA mode, press the MEDIA hard-key then
press the AUX soft-key. Or, press the Voice Command
hard key (if equipped) and after the confirmation
beep, say “Bluetooth Streaming Audio.”
Play Mode
When switching to BTSA mode, some audio devices will
start playing music directly through the vehicles sound
system. However, some devices require the music to be
initiated on the device before it will stream through
Uconnect® Phone (if equipped).
Selecting A Different Audio Device
1. Press the Uconnect® Phone
hard-key.
2. After the “Ready” prompt and the following beep, say
“Setup,” then “Select Audio Devices.”
3. You can say the name of the Audio Device to select or
say “List Audio Devices” to have Uconnect® Phone
list the available devices.
96 Uconnect® MULTIMEDIA (REMOTE DEVICES)