USER INTERFACE ELEMENTS
Power to operate the radio is supplied through the
ignition switch, which must be in the ON, ACC or in
ACC Delay mode in order to operate the radio.
Soft-Keys
Soft-keys are accessible on the touchscreen.
Hard-Keys
Hard-keys on the left and right side of the radio faceplate.
(1) Voice Command — If Equipped
Press the Voice Command hard-key (1)
and wait for the confirmation beep before you
say a voice command.
(2) Uconnect® Phone — If Equipped
Press the Uconnect® Phone hard-key (2) to
either activate the Uconnect® system or to
cancel an active phone call.
12 GENERAL HANDLING
To Next Page
Loading...
