CBF 125 AIR COOLING ENGINE SERVICE MANUAL
RENEGADE SPORT & SCRAMBLER X 125 EFI
92
8.6. Bearing installation
8.6.1. Apply appropriate amount of engine oil on
outer race bearing, then press the bearings
into corresponding holes with special tools
Note
1. Bearing shall be installed using
special tools.
2. When pressing bearing, force
shall be applied on outer race of
bearing; otherwise, the bearing
may be damaged.
8.6.2. Apply appropriate amount of lube oil onto
inner and outer races, then use special tools
to press oil seal to its position
8.6.3. Install locating plate of bearings and tighten
the bolts to specified torque
To Next Page
Loading...
