83
4. by selecting option Operate Program
Upgradation in home computer software menu
select the program upgradation package copied
into computer oscilloscope program starts
upgradation the home computer indicates in
upgradation please await
Picture 8-2 Program Upgradation
5. After upgradation oscilloscope display shall
appear indication upgradation successful No
operation to the oscilloscope at the moment, and
restart it, the program upgradation is completed
1. When there is any mistakes about program
upgradation package home computer shall
indicate mistakes about upgradation files, please
check it. The oscilloscope shall stop upgradation
and the program version shall not change before
storage.
2. If communication disconnection from home
computer power-off of oscilloscope or computer
etc. during the upgradation, oscilloscope shall stop
it and the program version shall not change before
storage.
→
,
,
,“
,…”.
,
:.
.
,
:
,
Notes:
UTD1000L User Manual
To Next Page
Loading...
Need help?
General
