UNI-T UTD1025CL - Page 93

87
UTD1000L User Manual
Oscilloscope
Trigger
Pulse width trigger
Edge trigger
Trigger sensitivity
Trigger mode
Pulse width scope
Vedio trigger
Trigger sensitivity
vedio trigger,
typical
(
)
Signal system and
horizontal/vertical
frequency (vedio
trigger type)
Slope trigger
Trigger condition
Slew rate scope
Edge type
Trigger level scope
Pretrigger ability
Holdoff scope 100ns - 1.5s
≤1div
()
()
﹥,﹤,﹦ ，
﹥,﹤,﹦
positive pulse width
negative pulse width
20ns-10s
2divs peak-to-peak value
＜()()
()
smaller than bigger than
equal to
,＞ ,
＝
40pV/μs 1.6kV/μs～
Support standard NTSC and PAL,
Scope horizontally 1-525(NTSC)
and 1-625(PAL)
Rise edge, fall edge
To screen center 10div
Normal mode/scanning mode,
pretrigger/delay trigger pretrigger
depth are adjustable