Unilumin UMini W User Manual

38
Fig 3-26 Drying mode Settings
Click “drying mode” based on actual circumstances, then click “Refresh” to enter corresponding drying mode.
Fig 3-27 Drying mode Settings
There are three dehumidification mode levels. The dehumidification time varies with the dehumidification
level. Exit the dehumidification mode and select the normal mode. The default brightness value is 60% after you
exit the dehumidification mode.
1) Dehumidification mode 1 (low gear) : The brightness gradually becomes 100% within 1 hour, and the
change process is 10% for 0-18 minutes, 20% for 18-36 minutes, 50% for 36-50 minutes, and 100% for 50-60
minutes.
2) Dehumidification mode 2 (medium) : The brightness gradually becomes 100% within 2 hours, and the
change process is 10% in 0-36 minutes, 20% in 36-72 minutes, 50% in 72-96 minutes, 80% in 96-108 minutes and
100% in 108-120 minutes.
3) Dehumidification mode 3 (high grade) : the brightness gradually becomes 100% within 4 hours, and the
change process is 10% in 0-72 minutes, 20% in 72-144 minutes, 50% in 144-192 minutes, 75% in 192-216 minutes
and 100% in 216-240 minutes.

Unilumin UMini W Specifications

General

Brand	Unilumin
Model	UMini W
Category	Monitor
Language	English