3.3 Display Configuration
Run UniLCT-Mars. Make sure that Control System on the main window is 1. Click the User option and select
Advanced Login, as shown in Figure 3-3.
Fig 3-3 Main Window of UniLCT-Mars
Enter the initial password “admin”, as shown in Figure 3-4, to go to the advanced user window.
Fig 3-4 User Login
After login, click Screen Config on the main window, as shown in Figure 3-5:
Fig 3-5 Main Window for Advanced User
Click Next, as shown in Figure 3-6:
Fig 3-6 Screen Configuration
To Next Page
Loading...
Need help?
General
