Unilumin UMini W User Manual

59
5.4 Warm-up Operation
If the LED display has been idle for 14 days, perform warm-up operations before using the LED display.
Set the prestored picture as follows when you initially start the LED display. This setting is for warm-up operation
only. You do not need to set the prestored picture if the LED display is used frequently.
5.4.1 Setting the Prestored Picture
For details about how to set the prestored picture, refer to Section 3.6. Select a black background picture. Set
Boot Screen to 60 seconds. Set both Cable Disconnect and No DVI Signal to Prestored Picture. Then click Save
to Hardware. See Fig 5-1.
Fig 5-1: Prestore Picture Setting

Unilumin UMini W Specifications

General

Brand	Unilumin
Model	UMini W
Category	Monitor
Language	English