Unilumin UMini W User Manual

60
5.4.2 Ageing Operation
On the main window, click Brightness to enter the brightness adjustment interface, as shown in Fig 5-2:
Figure 5-2 Main Window for Advanced User
Select Manual and set the brightness to 26 (the brightness is about 10%) by dragging the scroll bar below
Brightness Adjustment. See Fig 5-3:
Fig 5-3 Manual Adjustment
NOTE: It is recommended that manual brightness adjustment be finished within 60 seconds.
Return to the main window. Click Display Control to enter the Screen Control interface. Set Self Test to White.
Click Send to finish the operation. As showed in Fig 5-4 and Fig 5-5.
Fig 5-4 Display Control

Unilumin UMini W Specifications

General

Brand	Unilumin
Model	UMini W
Category	Monitor
Language	English