Union Instruments CWD3000 EXP - Figures; List of Tables

Appendix
120
Figures
Fig. 1.1: Name plate (example) ..................................................................................... 5
Fig. 1.2: Housing dimensions ........................................................................................ 6
Fig. 1.3: Markings and warning information ................................................................... 7
Fig. 1.4: Measuring ranges and accuracy ................................................................... 11
Fig. 4.1: Housing, rooms with lockable doors .............................................................. 22
Fig. 4.2: Depiction of control unit for pre-flushing and overpressure (example) ........... 22
Fig. 4.3: Depiction of combustion gas inlet solenoid valves (example) ........................ 23
Fig. 4.4: Depiction of pressure switches (example) ..................................................... 24
Fig. 4.5: Markings and warning information (example) ................................................ 25
Fig. 4.6: Warning information on electrical connection plate (example) Interior, cell 3 –
voltage supply ............................................................................................... 26
Fig. 4.7: Name plate with ATEX/IECEX marking (example) ........................................ 26
Fig. 5.1: Device overview ............................................................................................ 27
Fig. 5.2: Housing with no doors (example showing carrier gas option) ........................ 28
Fig. 6.1: Wall mounting ............................................................................................... 36
Fig. 6.2: Ignition protection gas connection, compressed air, 6 mm screw fitting ......... 38
Fig. 6.3: Connections for process, calibration, carrier and test gases, 6 mm screw fitting
...................................................................................................................... 40
Fig. 6.4: Flue gas/exhaust air connection .................................................................... 41
Fig. 6.5: Electrical connection, control unit (example) ................................................. 44
Fig. 6.6: Disconnector unit Gönnheimer FS852, example ........................................... 46
Fig. 6.7: Connector assignment of input/output IO external type 06 ............................ 47
Fig. 6.8: Transport securing devices (example shown) ............................................... 50
Fig. 6.9: Transport securing devices of pressure controller ......................................... 51
Fig. 8.1: Work stations (example) ................................................................................ 55
Fig. 9.1: Operator control elements/Structure of display .............................................. 57
Fig. 9.2: General information ....................................................................................... 60
Fig. 9.3: Information on overpressure differential pressure .......................................... 61
List of tables
Table 1: Profibus data structure ......................................................................................... 117