Union Instruments CWD3000 EXP - Fig. 6.3: Connections for Process, Calibration, Carrier and Test Gases, 6 MM Screw Fitting

Transport, installation and acceptance
40
Fig. 6.3: Connections for process, calibration, carrier and test gases, 6 mm
screw fitting
Number of connections optional, 1 shows input of gas from the top down
1
Carrier gas
I5.2 Input support gas
2
Test gas
I5.1 Input test gas
3
Calibration gas 2
I2.3 Input calibration gas 2
4
Calibration gas 1
I.2.2 Input calibration gas 1
5
Combustion gas
I1.1 Input process gas
1
1