2 EU Declaration of Conformity
Der Hersteller/The manufacturer
UNION Instruments GmbH
Zeppelinstraße 42
76185 Karlsruhe, Germany
erklärt hiermit, dass folgend bezeichnete Produkte/hereby declares, that the following named products:
Produktbezeichnung: Verbrennungskalorimeter Gerätegruppe: CWD3000 EXP
Product name: Calorimeter device group: CWD3000 EXP
Explosionsgruppe: II 2G Ex pxb IIC T4 Gb EG-Baumusterprüfung: BVS 19 ATEX 012 X
Explosion group: II 2G Ex pxb IIC T4 Gb EC type examination certificate: BVS 19 ATEX 012 X
Benannte Stelle für Baumusterprüfung/Notified body for type examination:
DEKRA Testing and Certification GmbH, Bochum, Germany, No. 0158
Benannte Stelle für QS-Überwachung/Notified body for QA assessment:
TÜV Product Service GmbH, Munich, Germany, No. 0123
konform sind mit den Anforderungen, die in der EU – Richtlinie festgelegt sind/are compliant with the
requirements as defined in the EU directive:
2014/34/EU ATEX Richtlinie
2014/34/EU ATEX directive
2014/30/EU Elektromagnetische Verträglichkeit
2014/30/EU Electromagnetic compatibility
Angewandte harmonisierte Normen/Harmonized standards used:
EN 60079-0:2012 Explosionsfähige Atmosphäre Teil 0: Betriebsmittel -Allgemeine Anforderungen
Explosive atmospheres - Part 0: Equipment - General requirements
EN 60079-2:2014 Explosionsgefährdete Bereiche – Teil 2: Geräteschutz durch Überdruckkapselung “p”
Explosive atmospheres – Part 2: Equipment protection by pressurized enclosure “p”
EN 61326-1:2013 Elektrische Mess-, Steuer-, Regel- und Laborgeräte - EMV-Anforderungen - Teil 1:
Allgemeine Anforderungen
Electrical equipment for measurement, control and laboratory use - EMC
requirements - Part 1: General requirements
Name des Dokumentationsbevollmächtigten: Schlichter
Name of documentation delegate:
Adresse des Dokumentationsbevollmächtigten: siehe Adresse des Herstellers
Address of documentation delegate: see address of manufacturer
Bei einer nicht autorisierten Änderung des Gerätes verliert diese Erklärung ihre Gültigkeit. /Any unauthorized
modification of the device results in invalidity of this declaration.