Union Instruments CWD3000 EXP - Transport Securing Devices

Transport, installation and acceptance
50
6.3.8 Removing/attaching transport securing devices
NOTE
Before commissioning/transport of the combustion calorimeter, it must be
ensured that all transport securing devices are removed/attached.
The following transport securing devices must be removed/attached within the
combustion calorimeter:
Fig. 6.8: Transport securing devices (example shown)
Item
No.
Component Type of securing device
1
Transport securing device for
density measuring cell
4x cable ties; 1x screw 5x16
2
Transport securing device of
pressure controller
2x retaining belts;
1x bubble wrap (inside)
2
1