Operation
Main menu - Options - System - Load factory settings
The factory settings are loaded with this key.
Main menu - Options - System - CSV Export
Three files are exported as an ASCI file with this key: 30 min at 1-second intervals,
3 hours at 10-second intervals and 5 days at 1-minute intervals.
The values are separated by TAB. All possible 25 curves are written at once to a
CSV file. This file can be processed, e.g. with a conventional spreadsheet.
Main menu - Options - System - Hold signal On/Off
The “Hold signal” function is switched on and off with this key.
Hold signal:
Storage of the mA values is activated with this function. After the function is ended,
an adjustment of the old and new mA signals is made over a time ramp (120 s).
To Next Page
Loading...