Union Instruments CWD3000 EXP - Main Menu - Options - I;O - Digital Inputs

Operation
71
Main Menu - Options - I/O - Digital Inputs
Various digital signals are configured in this menu.
The following must be observed here:
The pin assignment is preassigned.
 Section 6.3.7 !
Signals Zero position Contact CWD3000
Start calibration
high
open
Calibration starts
closed No calibration
low
open
No calibration
closed
Calibration starts
Start measurement
high
open
Measuring starts
closed
Measuring stops
low
open
Measuring stops
closed
Measuring starts
Hold signals
high
open
Hold mA
closed
mA online
low
open
mA online
closed
Hold mA
Cancel calibration
high
open
Calibration cancellation
closed No calibration cancellation
low
open
No calibration cancellation
closed
Calibration cancellation