Safety instructions
3.8.1 Performing a workplace risk assessment
Depending on the national regulations and, if necessary, independent of the CE
marking of this combustion calorimeter, the owner must prepare a hazard
assessment and specify personal safety equipment for different phases of
operation.
Further technical developments may result in deviations from these operating
instructions. If you would like more information or if you encounter problems that
are not covered in detail in this manual, contact us at the following address:
UNION Instruments GmbH
Zeppelinstraße 42
76185 Karlsruhe
Germany
+49 (0)721-680381-0
+49 (0)721-680381-33
support@union-instruments.com
http://www.union-instruments.com
To Next Page
Loading...
