Transport, installation and acceptance
After the line voltage is switched off, the device capacitors still carry voltage for
up to 5 minutes!
This time must be allowed to elapse before starting work on the high-voltage
electrical system.
The specifications of the VDE, the local and regional safety regulations, and the
factory-internal safety rules must be complied with at all times during work on
the combustion calorimeter!
• Check whether the line voltage present is consistent with the device voltage
of the combustion calorimeter.
• The combustion calorimeter may only be operated with effective protective
conductor connection in accordance with local requirements for high
operating currents.
To Next Page
Loading...
