Union Instruments CWD3000 EXP - Page 58

Operation
58
Item
No.
Designation Function
1
Numeric display
Output of current measured values
2
Display field
Information field
3
Arrows/Enter
Arrow keys enable movement to an input field. The Enter key
confirms the entered value.
4.1
Menu
Menu key returns you to the main menu from any other menu
level. The key simultaneously saves the input data in memory.
4.2
Start
Start key starts the measurement.
4.3
Stop
Stop key stops the measurement without switching off the power
supply.
4.4
ESC
ESC key cancels the current input operation regardless of the
menu level.
5
Input
Input keys are used to input numeric data. A value field on the
screen must be active for this.
5.1
Screenshot
This key creates and automatically saves a screenshot on the
inserted USB memory stick.
For service purposes only!
6
LED status display
Power: Device switched on
Operation: Process, calibration
Service: Service required
Fault: Major fault
Flame: Flame is burning
7
Menu keys
Menu keys are described in the software. Their meaning changes
according to which menu is selected. The function is labeled on
the current screen.
 Section 9.2 Grundsätzliche Bedienung!
8
Graphic display
Graphic representation of current measured values.
9
Curve values
Value display for selected curves.