Unipulse F159 - Page 90

6.WEIGHING MODE SETTING AND OPERATION
81
10
0
10
0
10
0
10
0
Near zero comparison
m+27
Upper/Lower limit comparison
Over/Under comparison
Weighing mode
2：Comparison OFF
1：Net weight
0：Gross weight
2：Comparison OFF
1：Net weight
0：Gross weight
4：ON when |Net weight|
<= Near zero set value
3：ON when |Gross weight|
<= Near zero set value
2：Comparison OFF
1：ON when Net weight
<= Near zero set value
0：ON when Gross weight
<= Near zero set value
10
0
10
0
10
0
10
0
Sign convention for discharge control
m+28
3：Comparison when complete signal
turns ON. Weight will be frozen.
2：Comparison when complete output
turns ON.
1：Comparison when Judge input
turns ON
0：Always
Complete signal output mode
Upper/Lower limit comparison mdoe
Over/Under comparison mode
1：Comparison when Judge input
turns ON
0：Always