Unipulse F159 User Manual

6.WEIGHING MODE SETTING AND OPERATION
83
6-8. Judging Times / AZ Times / At Start NZ Confirmation /
At Start WV Confirmation /Auto Jog (ON/OFF) / Auto Jog Timer
Judging times
F159 can perform Over/Go/Under comparison when the measuring process is
completed (synchronized with Complete signal). This two-digit number (00-99)
specifies the frequency at which the comparison takes place.
10
0
10
0
10
0
10
0
Sign convention for discharge control
m+28
2：Complete signal turns on when turns
on, and remains on until Compare
time expires, or, It turns on when
reading becomes “stable” and
remains on until Complete output
time expires.
1 ：After Compare time expires,
Complete signal turns on when
reading becomes “stable” and
remains on until Complete output
time expires.
0：Complete signal turns on when
Compare time expires, and remains
on until Complete output time
expires.
Complete signal output mode
Upper/Lower limit comparison mode
Over/Under comparison mode
10
0
10
-1
10
-2
Comparison inhibit time 0.00 - 9.99
10
0
10
-1
10
-2
Compare time 0.00 - 9.99
10
0
10
-1
10
-2
Complte output time 0.00 - 9.99
m+20
m+21
m+22
00 ： comparison disabled
01 ： every time
02 ： once in every two outputs
03 ： once in every three outputs
99 ： once in every 99 outputs

Unipulse F159 Specifications

General

Brand	Unipulse
Model	F159
Category	Control Unit
Language	English