6.WEIGHING MODE SETTING AND OPERATION
80
6-6. U/L Limit Comparison / U/L Limit Comparison Mode/
Near zero Comparison / Over/Under Comparison /
Over/Under Comparison Mode
The user uses these parameters to specify the type of weight (Net/Gross) and
timing for comparing Upper/Lower, Near zero, and Over/Under.
Options for each comparison function:
U/L limit comparison: Gross weight, Net weight or
Comparison OFF
U/L limit comparison mode: Always or Judge input ON
Near zero comparison: Gross weight, Net weight,
Comparison OFF, |Gross weight|,
or |Net weight|
Over/Under comparison: Gross weight, Net weight,
Comparison OFF
Over/Under comparison mdoe: Always, Judge input ON, Complete ON,
or HOLD
10
3
10
2
10
1
10
0
Upper limit 00000 - 99999
10
4
m
m+1
10
3
10
2
10
1
10
0
Lower limit 00000 - 99999
10
4
m+2
m+3