90
Copyright 2014 unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of unitech Electronics Co., Ltd.
QR Code
< Default All QR Code Settings >
QR Code On/Off
This selection applies to both QR Code and Micro QR Code.
QR Code Message Length
Scan the bar codes below to change the message length. Refer to Message Length
Description (page 49) for additional information. Minimum and Maximum lengths = 1-7089.
Minimum Default = 1, Maximum Default = 7089.
QR Code Append
This function allows the scanner to append the data from several QR Code bar codes together
before transmitting them to the host computer. When the scanner encounters an QR Code bar
code with the append trigger character(s), it buffers the number of QR Code bar codes
determined by information encoded in those bar codes. Once the proper number of codes is
reached, the data is output in the order specified in the bar codes. Default = On.
To Next Page
Loading...
