42
Copyright 2014 unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of unitech Electronics Co., Ltd.
Other Programming Selections
Clear One Data Format
This deletes one data format for one symbology. If you are clearing the primary format,
scan 0 from the Programming Chart inside the back cover of this manual. If you are
clearing an alternate format, scan 1, 2, or 3, depending on the format you are clearing.
Scan the Terminal Type and Code I.D. (see Symbology Chart on page 112), and the bar
code data length for the specific data format that you want to delete. All other formats
remain unaffected.
Clear all Data Formats
This clears all data formats.
Save to exit and save your data format changes.
Discard to exit without saving any data format changes.
To Next Page
Loading...
