70
Copyright 2014 unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of unitech Electronics Co., Ltd.
UPC-A Addenda Separator
When this feature is on, there is a space between the data from the bar code and the data from
the addenda. When turned off, there is no space. Default = On.
UPC-A/EAN-13
with Extended Coupon Code
Use the following codes to enable or disable UPC-A and EAN-13 with Extended Coupon Code.
When left on the default setting (Off), the scanner treats Coupon Codes and Extended Coupon
Codes as single bar codes.
If you scan the Allow Concatenation code, when the scanner sees the coupon code and the
extended coupon code in a single scan, it transmits both as separate symbologies. Otherwise,
it transmits the first coupon code it reads.
If you scan the Require Concatenation code, the scanner must see and read the coupon
code and extended coupon code in a single read to transmit the data. No data is output unless
both codes are read.
Default = Off.
To Next Page
Loading...
