1
Copyright 2014 unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of unitech Electronics Co., Ltd.
Chapter 1
Getting Started
About This Manual
This User’s Guide provides installation and programming instructions for the Unitech MS832
area-imaging scanner. Product specifications, dimensions, warranty, and customer support
information are also included.
unitech bar code scanners are factory programmed for the most common terminal and
communications settings. If you need to change these settings, programming is accomplished
by scanning the bar codes in this guide.
An asterisk (*) next to an option indicates the default setting.
Unpacking Your Device
After you open the shipping carton containing the product, take the following steps:
Check for damage during shipment. Report damage immediately to the carrier who
delivered the carton.
Make sure the items in the carton match your order.
Save the shipping container for later storage or shipping.
Connecting the Device
Connecting with USB
A scanner can be connected to the USB port of a computer.
1. Connect the appropriate interface cable to the device first, then to the computer.
To Next Page
Loading...
