Name: Unitech MS832
Brand: Unitech
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Code 128 Message Length

Scan the bar codes below to change the message length. Refer to Message Length

Description (page 49) for additional information. Minimum and Maximum lengths = 0-80.

Minimum Default = 0, Maximum Default = 80.

Code 128 Append

This function allows the scanner to append the data from several Code 128 bar codes together

before transmitting them to the host computer. When the scanner encounters a Code 128 bar

code with the append trigger character(s), it buffers Code 128 bar codes until it reads a Code

128 bar code that does not have the append trigger. The data is then transmitted in the order in

which the bar codes were read (FIFO). Default = Off.

Code 128 Code Page

Code pages define the mapping of character codes to characters. If the data received does not

display with the proper characters, it may be because the bar code being scanned was created

using a code page that is different from the one the host program is expecting. If this is the

case, scan the bar code below, select the code page with which the bar codes were created

(see Code Page Mapping of Printed Bar Codes on page 117), and scan the value and the

Save bar code from the Programming Chart on the inside the back cover of this manual. The

data characters should then appear properly.

Unitech MS832 User Manual

Other manuals for Unitech MS832