51
Copyright 2014 unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of unitech Electronics Co., Ltd.
When Check Character is set to Validate, but Don’t Transmit, the unit will only read Codabar
bar codes printed with a check character, but will not transmit the check character with the
scanned data.
Codabar Concatenation
Codabar supports symbol concatenation. When you enable concatenation, the scanner looks
for a Codabar symbol having a “D” start character, adjacent to a symbol having a “D” stop
character. In this case the two messages are concatenated into one with the “D” characters
omitted.
Select Require to prevent the scanner from decoding a single “D” Codabar symbol without its
companion. This sele ction has no effect on Codabar symbols without Stop/Start D characters.
To Next Page
Loading...
