79
Copyright 2014 unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of unitech Electronics Co., Ltd.
MSI
<Default All MSI Settings>
MSI On/Off
MSI Check Character
Different types of check characters are used with MSI bar codes. You can program the scanner
to read MSI bar codes with Type 10 check characters. Default = Validate Type 10, but Don’t
Transmit.
When Check Character is set to Validate Type 10/11 and Transmit, the scanner will only read
MSI bar codes printed with the specified type check character(s), and will transmit the
character(s) at the end of the scanned data.
To Next Page
Loading...
Need help?
General
