Name: Universal Audio Arrow
Brand: Universal Audio
Rating: 5 (1 reviews)

To Next Page

To Previous Page

Arrow Manual Using UAD Plug-Ins 217

Adjusting Parameters

The parameter settings within each UAD plug-in can be adjusted to achieve a desired

sonic effect. Parameter values are easily modiﬁed by dragging sliders, rotating knobs,

clicking switches and buttons, or by selecting values in a drop menu. The functions of all

individual UAD plug-in parameters are detailed in the UAD plug-in manuals.

The parameter adjustment style can be Circular, Relative Circular, or Linear. For

descriptions of these options, see User Interface Settings.

Tip: To increase adjustment resolution when adjusting rotary controls in circular

and relative circular modes, increase the radius of the mouse relative to the knob

while dragging (i.e. move the mouse farther away from the knob while dragging).

Text Entry

Parameters that have a value display ﬁeld can be modiﬁed directly with text entry. To

enter a parameter value using text entry, single-click the parameter value text ﬁeld. The

text value will highlight, indicating it is ready to receive a new value. Type in a new value,

then press Return, Enter, or Tab, or click outside of the text box. Press Esc if you want to

revert to the prior setting without entering the new value.

Values entered via text entry are rounded to the closest signiﬁcant digit. If an entered

value is out of range, it will be ignored.

Time Values

To enter time values, the units must be speciﬁed; m = milliseconds, and s = seconds.

For example: To enter 400 milliseconds, type 0.400s or 400m. To enter 1.5 seconds,

type 1.5s or 1500m.

Mouse Scroll

If your input device has a scroll function, it can be used to adjust knob and slider

controls. Place the mouse cursor over any knob or slider control, then use the scroll

function to change the parameter value.

Note: Some DAWs do not support parameter scrolling.

Keyboard Control (Mac)

If you control+click a parameter, that control is selected for keyboard control. This

feature is particularly useful when control adjustment is set to circular mode, and you

want to ﬁnely adjust a value.

Normally, clicking on a control in circular mode makes the value jump to the location

clicked. Control+clicking selects the control so the keyboard can be used to adjust the

value without causing its value to jump to the cursor location ﬁrst.

Questions and Answers:

Need help?

Do you have a question about the Universal Audio Arrow and is the answer not in the manual?

Universal Audio Arrow Specifications

General