Universal Audio Arrow User Manual

Arrow Manual Console Settings 172
Display Panel
Various Console display options are set within the Display panel.
Display panel
Metering
Note: The Metering Menu affects the Channel Meters of Console’s channel inputs
only. It does not affect the Aux Meters or the Monitor Meters, or the level of
signals being routed to the DAW.
Pre-Fader
When set to pre-fader, an input’s Channel Meter indicates the level at the Arrow input,
regardless of the Channel Fader setting. With this setting, changing the fader level will
not change the Channel Meter.
Tip: With this setting, the Channel Meters mirror signal levels being routed to the
DAW. Pre-Fader metering allows you to monitor record levels from within Console.
Post-Fader
When set to post-fader, changing an input’s Channel Fader will change the Channel
Meter.
Important: When post-fader metering, the Channel Meters do not display signal
levels being routed to the DAW, and input/recording levels should be monitored in
the DAW mixer to detect signal clipping (if any).

Universal Audio Arrow Specifications

General

Type	Audio Interface
Connectivity	Thunderbolt 3
Input Channels	2
Output Channels	2
Simultaneous I/O	2 x 4
Preamps	2
Phantom Power	Yes
A/D Resolution	24-bit/192 kHz
Analog Inputs	2 x XLR/TRS Combo
Headphones	1 x 1/4"
Thunderbolt Ports	1 x Thunderbolt 3
Power Supply	Bus powered
Software	UAD Software
Compatibility	Mac, Windows
Analog Outputs	2 x 1/4" TRS