Arrow Manual Console Settings 171
Popover Title Bar
Navigation Switches
Input/Output Channel
Switches the window to display the input or output of the same Arrow channel.
Previous/Next Channel
Switches the window to display the previous or next Arrow channel.
Tip: The popover moves from channel to channel with these switches. To prevent
the popover from moving when these switches are used, drag the window to any
location other than its default position.
Console Channel
The name of the channel that is being re-assigned is displayed at the top of the window.
Route Assign Columns
The Device, Inputs, and Outputs columns are displayed in the Route Assign window.
Arrow Device
The DEVICE column on the left displays all detected interfaces and the NONE switch.
Click a device to select it for channel assignments in the other two columns. Click NONE
to remove all I/O assignments from the channel.
Channel Type
The TYPE column in the middle displays all available channel types for the selected
device. Click a channel type to select it and display all channels available for assignment
in the INPUT/OUTPUT column.
Available Routes
The column on the right displays all available routes for the selected channel type. Click
an available route to assign the input or output. The assigned route is highlighted in
blue.
Note: If an output is gray in the output column and cannot be selected, the output
is already in use by an input channel (custom I/O Matrix route) or HP cue output.
To Next Page
Loading...
Need help?
General
