Universal Robots UR3e

WARNING: HOT SURFACE
Prolonged contact with the heat generated by the robot arm and the
Control Box, during operation, can lead to discomfort resulting in
injury.
•
Do not handle or touch the robot while in operation or
immediately after operation.
•
Check the temperature on the log screen before handling or
touching the robot.
•
Allow the robot to cool down by powering it off and waiting one
hour.
CAUTION
Failure to perform a risk assessment prior to operation can increase
risk of injury.
•
Perform a risk assessment and reduce risks prior to operation.
•
If determined by the risk assessment, do not enter the range of
the robot movement or touch the robot during operation.
•
Read the information found in Risk Management.
CAUTION
Using the robot with untested external machinery, or in an untested
system, can increase the risk of injury to personnel.
•
Test all functions and the robot program separately.
NOTICE
Very strong magnetic fields can damage the robot.
•
Do not expose the robot to permanent magnetic fields.
READ MANUAL
Verify all mechanical and electrical equipment is installed according to
the specifications and warnings found in the Mechanical Interface and
in the 4 Electrical Interfaceon page44.
UR3e 20 User Manual
2.Safety
Copyright © 2009–2024 by UniversalRobotsA/S. All rights reserved.