Universal Robots UR3e

Open... Allows you to load a Program and/or Installation.
Opening a Program
1. In the Program and Installation Manager, tap Open... and select Program.
2. On the Load Program screen, select an existing program and tap Open.
3. In the File Path, verify that the desired program name is displayed.
Opening an Installation.
1. In the Program and Installation Manager, tap Open... and select Installation.
2. On the Load Robot Installation screen, select an existing installation and tap
Open.
3. In the Safety Configuration box, select Apply and restart to prompt robot reboot.
4. Select Set Installation to set installation for the current Program.
5. In the File Path, verify that the desired installation name is displayed.
User Manual 327 UR3e
24.Program and Installation Manager
Copyright © 2009–2024 by UniversalRobotsA/S. All rights reserved.