5.5.1.3 Handling
This option is used to activate the alarm notification on the respective input.
Possible options are: “Ignore” and ”Handle”.
Use “▲▼” to select.
Select “Handle” option to access the following submenus:
policy
PTZ lincage
Handling
Position the “Active Frame” on the “Handling” icon and press “ENTER”.
The following window will appear.
Figure 34: input alarm notification submenu for 1093/043 (16 channel) device
The selected item is highlighted.
Press arrows “◄►” to point the cursor to the various menu items.
Select “CONFIRM” and press “ENTER” to make the changes effective.
Select “CANCEL” and press “ENTER” to cancel the changes.
Press “ESC” to go back by one step.
Press “ESC” several times until the configuration window closes to quit the configuration menu.
5.5.1.3.1 Record camera
This option is used to select which video channels to associate to the respective alarm.
To associate, select the respective check box using “◄►” and press “ENTER” or “EDIT”.
Symbol “” indicates that the association option is enabled; symbol “×” indicates that it is not.
External alarm status is shown with a red icon if the “On screen warning” option is checked.
5.5.1.3.2 Record schedule
This option can be used to set up to 4 alarm indicating periods for each day of the week with respective event start and
end times.
Use “▲▼” to select the day.
Use “◄►” to point the cursor to the hours/minutes of the period to be set.
Press “▲▼” to select hours/minutes. Specific messages will appear if times overlap.
Select “Copy to” to select the day of the week where to copy notification programming. Select “All” to copy the settings
on all days of the week. Select “Copy” and press “ENTER” to copy the settings. Confirmation of the operation will be
required: press “ENTER” again to confirm.
DS1093-005C 52
To Next Page
Loading...
Need help?
General
